October 2012
4-98
ColorQube 8570/8870 Service Manual
REP 6.2
Revised, 3rd Revision - Xerox Internal Use Only
Repairs and Adjustments
REP 6.2 No Paper Sensor
Parts List on
PL 6.1 Item 2
Removal
1.
Remove the Front Door (
REP 1.1
).
2.
Remove Tray 2.
3.
Remove the Pick Assembly and Retard Rollers (
REP 3.10
).
4.
Remove the Lower Inner Duplex Guide (
REP 3.2
).
5.
Remove the Inner Simplex Guide (
REP 3.1
).
6.
Release the 4 hooks that secure the No Paper Sensor to the left side of the Pick Assem-
bly recess.
7.
Disconnect the wiring harness connector
P/J127
from the wiring harness and remove the
Sensor.
Figure 1 Remove the No Paper Sensor
Replacement
Disconnect the Preheater Assembly wiring harness connectors
P/J125
and
P/J115
to make
additional room to replace the Sensor. Release the lock on the wiring harness connector
P/
J115
to remove it from the Preheater Assembly.
Figure 2 Wiring Connector Locations
Summary of Contents for COLORQUBE 8570
Page 1: ...ColorQube 8570 8870 Printer ColorQube 8570 8870 Service Manual Xerox Internal Use Only...
Page 2: ......
Page 423: ......
