October 2012
2-17
ColorQube 8570/8870 Service Manual
74,215, 74,952
Fault Messages and Codes
Xerox Internal Use Only - Revised, 3rd Revision
74,215, 74,952 525-Sheet Feeder Faults
A 525-Sheet Feeder error has occurred. The following troubleshooting procedure applies to
these errors.
Initial Actions
•
Reboot the printer and verify the error persists.
•
Check paper path in the printer and HCFs for obstructions or jammed sheets.
•
If the problem persists, perform the following procedure.
Troubleshooting Reference
Applicable Parts (Chapter 5 - Parts List)
•
525-Sheet Feeder (HCF) with Tray,
PL 3.1 Item 12
•
Harness, Left Side Power Control,
PL 5.1 Item 17
Wiring and Plug/Jack Reference (Chapter 7 - Wiring Data)
•
Figure 2
, Left Side Wire Routing
Procedure
Check paper path in the printer and HCFs for obstructions or jammed sheets. Remove obstruc-
tions.
•
For HCF Motor Stall failure, send a print job to feed paper from the tray at fault.
•
For HCF Raise failure, reinsert the tray and verify that it raised properly.
Does the error persist?
Y
N
Troubleshooting complete.
Replace the 525-Sheet Feeder (
REP 3.12
).
Table 1 Applicable Fault Codes
74,215
HCF2 Raise Failure
74,952
HCF2 Motor Stall Fault
Summary of Contents for COLORQUBE 8570
Page 1: ...ColorQube 8570 8870 Printer ColorQube 8570 8870 Service Manual Xerox Internal Use Only...
Page 2: ......
Page 423: ......
