manualshive.com logo in svg

Xerox ColorQube 9201, User Manual

The Xerox ColorQube 9201 user manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and valuable information on operating the ColorQube 9201 printer. Get the most out of your device by accessing the user manual at 88.208.23.73:8080.

Share
Download
background image

Fax Regulations

ColorQube™ 9201/9202/9203

Safety and Regulations

321

Canada

Note:

The Industry Canada label identifies certified equipment. This certification means that the 

equipment meets certain telecommunications network protective, operational and safety 
requirements as prescribed in the appropriate Terminal Equipment Technical Requirements 
document(s). The Department does not guarantee the equipment will operate to the user’s 
satisfaction.

Before installing this equipment, users must make sure that it is permissible to be connected to the 
facilities of the local telecommunications company. The equipment must also be installed using an 
acceptable method of connection. The customer should be aware that compliance with the above 
conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. 
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give 
the telecommunications company cause to request the user to disconnect the equipment.

Users should make sure for their own protection that the electrical ground connections of the power 
utility, telephone lines and internal metallic water pipe systems, if present, are connected together. 
This precaution may be particularly important in rural areas.

CAUTION:

Users should not attempt to make such connections themselves, but should contact 

the appropriate electric inspection authority, or electrician, as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the 
maximum number of terminals allowed to be connected to a telephone interface. The termination on 
an interface may consist of any combination of devices subject only to the requirement that the sum 
of the Ringer Equivalent Numbers of all of the devices does not exceed 5. For the Canadian REN value, 
please see the label on the equipment.

Europe

Radio Equipment & Telecommunications Terminal Equipment Directive

The Facsimile has been approved in accordance with the Council Decision 1999/5/EC for pan-European 
single terminal connection to the public switched telephone network (PSTN). However, due to 
differences between the individual PSTNs provided in different countries, the approval does not, of 
itself, give an unconditional assurance of successful operation on every PSTN network terminal point.

In the event of a problem you should contact your authorized local dealer in the first instance.

This product has been tested to and is compliant with ES 203 021-1, -2, -3, a specification for terminal 
equipment for use on analogue-switched telephone networks in the European Economic Area. This 
product provides an user-adjustable setting of the country code. Refer to the customer documentation 
for this procedure. Country codes should be set prior to connecting this product to the network.

Note:

Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling, it is 

recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call 
setup. Modification of this product, connection to external control software or to external control 
apparatus not authorized by Xerox, will invalidate its certification.

Summary of Contents for ColorQube 9201












































































































































































































































































































































Reviews:

No comments

Related manuals for ColorQube 9201

Canon iPF650 - imagePROGRAF Color Inkjet Printer Basic Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 40
Canon iP90 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP90 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon iPF650 - imagePROGRAF Color Inkjet Printer Install Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 16
Canon iP100 - PIXMA Color Inkjet Printer Setup Instructions preview
iP100 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual preview
imageRUNNER ADVANCE C5560
Brand: Canon Pages: 67
Canon imageRUNNER 3300 Reference Manual preview
imageRUNNER 3300
Brand: Canon Pages: 366
Canon IMAGERUNNER ADVANCE C5051 Getting Started preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 252
Canon iPF710 - imagePROGRAF Color Inkjet Printer Operations preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 2
Ier I420 User Safety And Start Manual preview
I420
Brand: Ier Pages: 8
NEC NEFAX - 691 B/W Laser Introduction Manual preview
NEFAX - 691 B/W Laser
Brand: NEC Pages: 20
Lanier LD360 Brochure & Specs preview
LD360
Brand: Lanier Pages: 6
Oce COLOR SYSTEM 110 Operator'S Manual preview
COLOR SYSTEM 110
Brand: Oce Pages: 392
Oki MICROLINE 720 Handbook preview
MICROLINE 720
Brand: Oki Pages: 120
Olympus U-5RES-ESD Instructions Manual preview
U-5RES-ESD
Brand: Olympus Pages: 16
BIXOLON SPP-R220 Installation Manual preview
SPP-R220
Brand: BIXOLON Pages: 20
Sagem MF 6990dn User Manual preview
MF 6990dn
Brand: Sagem Pages: 154
Star TSP100IIIBI Easy Setup Manual preview
TSP100IIIBI
Brand: Star Pages: 2
Canon imageRUNNER ADVANCE DX C7700 Series Service Manual preview
imageRUNNER ADVANCE DX C7700 Series
Brand: Canon Pages: 127

Brands by name

Popular brands

Load more brands