background image

9 Setups 

160

Xerox CopyCentre/WorkCentre 118 User Guide

Change Recip. Name

*1

Select when changing the registered name. Select [Edit] to display the recipient name 
entry field screen, then select [Entry Mode] to switch the character type and enter the 
name using the alphanumeric keypad on the control panel.

Change Fax No

Select when changing the registered Fax number.

Change Address

Select when changing the registered E-mail address.

Delete

Select when deleting the registered Speed Dial.

1*:You can also use symbols as well as text and numbers.

Select [Alphabet] for Entry Mode, press the <#> button to display a list of symbols, 
then select a symbol using the <Select> button.

Fax Program

This feature allows you to program information about the fax destination and the 
features used to send faxes. You can always send faxes using the same conditions of 
transmission by recalling the program using One Touch Dial or Speed Dial. In addition 
to the information of the fax destination, you can program the following three types of 
program. Fax Send, Poll (Polling) Receive, and Post Send that transmits more than one 
document at a specified time.

1.

Select a program number (p01 to p30) selecting [

T

] or [

S

] using the <Select> 

button, or select to search a program number using [By Program No.].

2.

Press the <Enter> button.

3.

Perform the necessary operations.

Program Name

*1

Enter the program name. Select [Edit] to display the Program Name entry field screen, 
select [Entry Mode] to switch the character type and enter the name using the 
alphanumeric keypad on the control panel.
To change the name, press the <C> button to delete the entered name, and then enter 
the new name.

Index

Enter the index used to search the program name in the Address Book.

Summary of Contents for Copycentre C118







































































































































































































































Reviews: