Xerox
®
D95/D110/D125 Copier/Printer Security Function Supplementary Guide
35
Operation Using
Control Panel
This section describes the operation using control panel to use security features for System
Administrator and authenticated users.
User Authentication
Before using all services and configuring settings, a user must be authenticated with an ID and
a passcode.
1.
Press the <Log In/Out> button on the control panel.
2.
Enter the "User ID" from keypad.
3.
Select [Next Input] on the touch screen.
4.
Enter the "Passcode" from keyboard.
5.
Select [Enter] on the touch screen.
All features on the control panel become available.
Important:
When another user interrupts and uses the machine by using the interrupt mode, the user
needs to logout before canceling the interrupt mode.
Example:
User A is authenticated > interrupt mode > User B login > job complete > User B logout >
cancel the interrupt mode
Note: Before entering the user ID and the password, select "Registered User" or "System
Administrator" when remote authentication is used.
Only the Machine Administrator’s ID (default: “admin”) is pre-registered in the machine, but
other user IDs are not.
In a remote authentication server, on the other hand, the Machine Administrator’s ID is not
pre-registered.
Although "admin" can be registered as a user ID, it cannot be registered as the Machine
Administrator’s ID in the machine.
7
