Xerox DocuColor 1632 Service Manual Download

Page: 834 / 1064

6/02
6-70

DC1632/2240

dC305, dC330

Prelaunch Training/Review

General Procedures and Information

dC305 UI Component Check

Purpose

Checks the operations of the UI Screen and Control Panel buttons.

Procedure

Enter the

Diagnostic Mode

. Refer to

Entering Diagnostic Mode using the PWS

Select the

Diagnostics

Tab in the Service Entry Screen.

Select the

System Test

Tab in the Diagnostics Screen. The System Test Screen displays.

The UI Component Check dC305 is the default screen.

Select

Start

. The following message displays,

Perform the UI Component Check on

the Machine. When complete, select Stop

Select

Touch the

UI Screen

in a different locations. The highlighted point moves to the new loca-

tion.

All LEDs should be illuminated when the dC305 Touch Screen Test is displayed. Select

Stop

to Turn-OFF all LEDs.

Select

Stop

on the Component Check Screen.

The Touch Screen Test Screen on the machine UI closes.

dC330 Component Control

Purpose

The purpose of the dC330 Component Control is to display the logic state of input signals and
to energize output components.

NOTE: Refer to

Table 1

for a list of all Input Components listed by Chain/Link ID number.

Refer to

Table 2

for a list of all Output Components listed by Chain/Link ID number.

Procedure

Enter the

Diagnostic Mode

. Refer to

Entering Diagnostic Mode using the PWS

Select the

Diagnostics Tab

on the Service Entry Screen.

Select

Component Control

(dC330) on the Diagnostic Entry Screen.

The dC330 Screen is displayed. The display indicates the following:
ï

Input/Output Components

ID Number (chain/function order)

Active Stack (including ID and state of component)

NOTE: The Component Control Codes can be selected in categories by their related sys-
tem, such as: Processor, System, Sorter / OCT / Mailbox, Finisher, DADF, HCF and ITT.

Activate the desired component code by double clicking on the Chain/Link ID number or
by clicking once on the Chain/Link ID number then selecting the

Start Button

. The IDís

will display in the Active Stack.

Press the

Stop

button or

double click

the active component in the active stack box to

end the test. The ID and Active Stack components are removed from the Active Stack
box.

Stacking Component Codes

To stack several codes, select the first code and press

Start

, then select the next code

and press

Start

. Continue to enter up to eleven codes.

The selected ID appears in the ID column of the Active Stack box and the state changes
to Run; H or L as applicable.

Stop a highlighted component by pressing

Stop

or double click the active component in

the Active Stack Box

To switch Off all components and clear the screen, press

Stop All

NOTE: Components that are currently running are shaded in Green. Components that have
been run are shaded in Yellow.

NOTE: When exiting dc330, the machine resets and communication between the PWS and
the machine is momentarily lost. The PWS will reconnect automatically.

Xerox DocuColor 1632, Service Manual

Search results

Summary of Contents for DocuColor 1632

Reviews:

Related manuals for DocuColor 1632

Brands by name

Popular brands