DocuColor 240/250
DocuColor 240/250 Training and Information Guide
111
The Variable Size screen allows you to specify the exact size of the paper you
load into the paper tray. You can use the arrow buttons on the touch screen to
change the X and Y dimension values for the paper you load. After you have
changed your Paper Size information, touch the Save button.
The following paragraphs will provide you with instructions to use when loading
specific paper types, such as transparencies, drilled paper, tabs, heavyweight
paper, and envelopes.
Transparencies
Load transparencies into the Bypass Tray face up, or into Trays 1-4 face down.
Be sure to select Transparency as the media type on the Touch Screen.
Hole Punched
Load hole punched and perforated paper in Tray 1, Tray 2, Tray 3 and Tray 4
face down, with the holes on the leading edge (left). Load hole punched paper in
the Bypass Tray face up, with the holes on the leading edge (right). Be sure to
select Hole Punched as the paper type on the touch screen.
Tabbed Stock
Load tabbed stock only into the bypass tray. Tabbed stocks should be loaded
face up with the tabs on the trailing edge.
NOTE: Tabbed stock cannot be inserted inside a copying job - tabs can only
be processed as covers, or as an entire copy job.
Be sure to select the proper Paper Type after loading the tabbed stock.
Heavyweight Stock
Load Heavyweight stock into any of the paper trays.
NOTE:
Heavyweight 2 stock from 177gsm to 220gsm can be loaded in Trays
1-4. Heavyweight 2 stock from 177gsm to 300gsm can be loaded in
the Bypass Tray.
Be sure to select the proper Heavyweight Paper Type after loading the tray.
Envelopes
Envelopes can only be loaded into the Bypass Tray. Place the envelopes into
the Bypass tray face up. The flaps should ALWAYS be closed and on the leading
(right) edge.
Your machine can feed the following types of envelopes:
•
C4 (LEF): 229mm x 324mm
•
C5 (LEF): 229mm x 162mm
