DocuColor 240/250
DocuColor 240/250 Training and Information Guide
148
Loading Staples - Professional Finisher with Booklet
Maker
When a Professional Finisher (with Booklet Maker) is installed and it is time to
replace the booklet staple cartridge, a message appears on the display. When
this message appears, replace the staple cartridge with a new one. This
procedure shows you how to remove an empty staple cartridge from the
Professional Finisher (with Booklet Maker) and replace it with a new staple
cartridge.
1. To gain access to the staple cartridge, make sure the machine has
stopped, and open the Finisher Front Door.
2. Press the levers R2 and R3 to the right, and pull out the unit. Hold the tabs
of the booklet staple cartridge, and then lift to remove it.
3. Dispose of the staple cartridge according to the instructions contained in
the new staple cartridge box.
4. Open a new staple cartridge. Holding the tabs of the new booklet staple
cartridge, return the cartridge to the original position and gently push it
until you hear it click into place. Return the unit to its original position and
close the Finisher Front Door.
