DocuColor 240/250
DocuColor 240/250 Training and Information Guide
159
Fault Code
Cause/Remedy
003-760
Cause: An incompatible combination of
features are specified in the document
scan conditions. Remedy: Check the
selected options.
003-761
Cause: The paper size of the tray
selected for auto tray is different from
the paper size of the tray selected for
Auto Repeat. Remedy: Change the
paper size for the tray, or change the
[Paper Type Priority] settings.
003-763
Cause: An error occurred when reading
the Gradation Adjustment Chart.
Remedy: Place the Adjustment Chart
properly on the document glass.
003-795 Cause:
When
enlarging/reducing
a
scanned document to the specified
paper size, the reduction/enlargement
ratio value exceeds the allowed range.
Remedy: Take one of the following
actions:
•
Manually enter a
reduction/enlargement ratio.
•
Change the paper size.
005-274
Cause: An error occurred in the
document feeder. Remedy: Power-
cycle the machine. Contact your Xerox
Customer Support Center.
012-211 Cause:
Finisher
malfunctioned.
Remedy: Power-cycle the machine. If
the machine is not improved by
performing the relevant remedy,
Contact your Xerox Customer Support
Center.
012-260 Cause:
Finisher
malfunctioned.
Remedy: Power-cycle the machine. If
the machine is not improved by
performing the relevant remedy,
Contact your Xerox Customer Support
Center.