DocuColor 240/250
DocuColor 240/250 Training and Information Guide
166
Fault Code
Cause/Remedy
027-751
Cause: When following the job flow, an
error occurred. Remedy: Check the
settings for the job flow.
027-770
Cause: The print data cannot be
processed because of PDL error.
Remedy: Check the print data and try
to print again.
027-771
Cause: A disk full error occurred.
Remedy: Remove unnecessary data
from the hard disk to increase free disk
space.
027-796
Cause: When the machine is
configured to only print attached
documents when received by mail, a
message with no attachments is
discarded upon receipt. Remedy: To
print the mail body or header
information as well, change settings in
the Properties screen of CentreWare
Internet Services.
027-797
Cause: Invalid received mail output
destination. Remedy: Specify a correct
output destination, and send the mail
again.
047-210
Cause: An error occurred with the
offset stacking module. Remedy:
Power-cycle the machine. If the
machine is not improved by performing
the relevant remedy, contact your
Xerox Customer Support Center.
062-210
Cause: The document feeder
malfunctioned. Remedy: Contact your
Xerox Customer Support Center.
062-211
Cause: An error occurred in the
document feeder. Remedy: Contact
your Xerox Customer Support Center.
062-220 Refer
to
062-210.
062-277
Cause: A communications error
occurred between the document scan
unit and the document feeder.
Remedy: Contact your Xerox Customer
Support Center.