DocuColor 240/250
DocuColor 240/250 Training and Information Guide
178
Bypass Tray Jams or Misfeeds
Tray 5 (Bypass) Jams occur in the paper path clearance areas. The machine will
display a message indicating the clearance area.
If after clearing the jam, the Tray 5 feeder jams or misfeeds again, follow the
steps below:
•
Ensure that the Bypass Tray guides are against the edges of the loaded
paper.
•
Check that the Bypass Tray paper attributes are set correctly.
•
Check that the paper is within specification.(8.5"x11" to 12"x19", 255 gsm
maximum, up to 250 sheets of 80 gsm).
•
Fan the paper and load it into the bypass tray. Ensure that the paper does
not cover the maximum fill line.
NOTE: Do not add paper to the tray when paper is already loaded. Instead,
remove the paper and combine the additional paper with the paper from
the tray and reload.