DocuColor 240/250
DocuColor 240/250 Training and Information Guide
18
Machine Setup
Your machine is designed to enable machine and feature default settings to be
customized to meet your requirements. This module identifies the key default
settings that you can change to customize the machine for your convenience.
Changing these settings will not take long to complete but will save you time
when using the machine.
There are 2 steps to accessing the System Administration menu:
1. Select the Log In/Out button on the control panel.
2. Use the number keypad to enter the default password - 11111. Select
Confirm on the touch screen.
NOTE:
11111 is the factory set default password. It is recommend that you
change this password.
Set Date and Time
Set the date format, either M/D/Y or D/M/Y or Y/M/D, and enter the correct date.
Set the correct time using either the 12 or 24 hour clock. The current date and
time are displayed on confirmation pages and activity reports.
Reduce \ Enlarge Presets
When the More... button is selected on the Reduce/Enlarge area of the Basic
Copying tab, the user is presented with a selection of Reduce/Enlarge options.
These options are set using the Reduce/Enlarge Presets selection in the
System Administration menu. Set the Reduce/Enlarge percentages to reflect
your business needs.
Display Brightness
Depending on where your machine is located, you may wish to adjust the touch
screen display in order to minimize glare and improve the touch screen
readability.
The touch screen display brightness knob is located on the left side of the
Control Panel. Rotate the knob as required to adjust the touch screen display
brightness.