background image

Customer Expectations Setting Guidelines

Xerox DocuColor 40/30 Family Digital Color Production System

6

09/08/99

Version 6.0

 

 

OUTPUT CAPACITY

–  The standard output tray will handle up to 200 sheets of

24 lb. Xerox Color Xpressions paper.  Thicker papers will
reduce capacity of this tray

 

MULTI-SHEET INSERTER  (MSI)

–  MSI capacity is up to 50 sheets for Xerox Color

Xpressions 24 lb. paper.  Capacity is less for thicker
stocks.

 

COPY QUALITY

–  Color quality is subjective and will appear to vary under

different surrounding light conditions.

–  Like other color reproduction processes, there will be

some variation in output quality over time.

–  Copy quality is strongly influenced by paper surface

structure, texture and color.  Key applications should be
printed on the DocuColor 40/30 Family of products using
representative customer paper and reviewed by the
customer.

DUPLEX COPYING

–  The DocuColor 40/30 Family of products will auto-duplex

from the internal trays on papers up to 11”x17”.

–  The Multi-Sheet Inserter cannot be used for auto-duplex.

Manual duplexing is available through the MSI.

 

COPY ALIGNMENT

–  Image-to-paper placement can vary up to .08” (2 mm)

depending on paper, stock, machine setup, and other
factors.

–  Front-to-back alignment for duplex can vary up to .16”

(4.1 mm).

 

 

IMAGEABLE AREA SIZE

–  The maximum image area that can be scanned from the

document glass is 11.69” x 17”.

–  DocuColor 40/30 software version 4.4 has an imageable

area in the copier mode of 11.69” 

±

 0.5% x 17” 

±

 0.5%.

In the printer mode the imageable area increases to
11.69” 

±

 0.5% x 17.13” 

±

 0.5%.  Additionally, the image

can be centered in the 18” direction of the paper to aid
back-to-front alignment of duplex images.  This centering
operation can be performed by a Xerox Service
Representative.

 

Maximum Image

Software 4.4 – 4.7

Paper size = 12x18
Copier mode, image size =
11.69 

±

 0.5% x 17 

±

 0.5%

Printer mode, image size =
11.69 

±

 0.5% x 17.13 

±

 0.5%

LE

TE

dklkd akd k wsf iakdj f
jdklsakdj ;kdjfk a;dkf
lkdj ;akdjf djfkj
fiewinvxokfirowier
qeurweirlaiepovna d a d
if admnmfdpoiru
ir iov md
oirpo ioidsufmn
mcvpoiivjapdfidf  ii

dkii k wsf iakdj f
jdklsakdj ;kdjfk a;dkf
lkdj ;akdjf djfkj fiewin
firowier qeurweir
airiuwoi csf oeifzcivcgi
tr dvngifg

wre dfi fdf pop lcivna
mcvm[orkjdfocin.

Summary of Contents for DocuColor 30


















Reviews: