3
3-20
Performing WebSetup
Convert Paper Sizes
—Specify whether to convert paper sizes in documents automati-
cally to the default paper sizes specified. For example, if you select
Letter/11x17->A4/
A3
, a letter size document is automatically printed on A4 paper. If you select
No,
the
server will only print the document if it finds a media source in the size specified by the
file.
Print Cover Page
—Specify whether the DocuColor 40 CP prints a cover (job sum-
mary) page at the end of each print job. If you select
Yes
, each print job is followed by
a page containing the name of the user who sent the job, the document name, the
server name, the time the job was printed, the number of pages printed, and the status
of the job. If a PostScript error occurs, and the
Print to PS Error
option is set to
Yes
, an
error message takes the place of the job status.
Allow Courier Substitution
—Specify whether to substitute Courier for unavailable
fonts. If this option is set to
No
, jobs with fonts that are not available on the
DocuColor 40 CP hard disk will not print due to a PostScript error.
Print to PS Error
—Specify whether the DocuColor 40 CP should print the available
portion of a print job when it encounters a PostScript error. Select
Yes
to print the por-
tion of the job that was processed before the error occurred; select
No
to cancel the job
entirely whenever a PostScript error is encountered
Enable Bypass Tray by Default
—Select
Yes
to specify that jobs should be printed from
the bypass tray. Use this option to enable printing from the bypass tray when tray
selection is not otherwise available in the interface, such as when printing from the
command line (lpd or DOS). In general, select
No
when the interface permits tray
selection on a job-by-job basis.
CMYK Simulation
—CMYK simulation allows color correction to simulate printed out-
put on a commercial press, so that the DocuColor 40 CP output can be used for
proofing. The SWOP standard is used in the United States, DIC in Japan, and Euros-
cale in Europe. Custom standards are user defined and named.
CMYK Simulation Method
—The simulation methods are Quick and Full. Quick simu-
lation assumes that the copier toners match the printer’s inks, and all changes affect
only one color (C, M, Y, or K) at a time. Full simulation, which is the default, allows
for more flexibility in matching toner to ink and all changes interact to maintain a bet-
ter color balance.