3
3-21
Performing WebSetup
RGB Source
—The RGB source is the color space used to control color for conversion
from screen to printed output. EFIRGB, which is the default, is based on the reference
points used in the creation of the DocuColor 40 CP software. sRGB (PC) is based on
an average of a large number of PC monitors. Apple Standard is the standard reference
point for Apple’s ColorSync software.
Restarting the DocuColor 40 CP
You must reboot the DocuColor 40 CP before your changes take effect.
T
O
RESTART
THE
D
OCU
C
OLOR
40 CP:
1.
Make sure that the information screen on the Control Panel reads Idle.
If Printing or RIPping appears, the DocuColor 40 CP is processing, and you must
wait until the system finishes and reaches the Idle state.
If the DocuColor 40 CP has just finished processing, wait five seconds after Idle
appears before shutting down.
2.
Click the Reboot Server button.
When the DocuColor 40 CP has rebooted, print a Configuration page from the Con-
trol Panel to confirm your settings (see page 2-48).