4
4-8
Setting up Network Servers
T
O
CREATE
AN
NDS
SERVER
AND
ASSIGN
A
PRINTER
:
1.
Start NetWare Administrator and select the container in which you are going to define
the NDS print server for the DocuColor 40 CP.
2.
Choose Create from the Object menu.
3.
In the New Object dialog box, select Print Server.
4.
Enter a name for the print server.
5.
Select Define Additional Properties.
6.
Click Create.
7.
In the Print Server dialog box, click Assignments.
8.
Select Add and select the printer (object) you want to assign to the print server.
9.
In the Select Object dialog box, browse the Directory Context list until the printer you
want is listed under Objects.
10.
Select the printer and click OK.
The remaining setup is performed on the DocuColor 40 CP. An outline follows; for
more detailed information, see page 2-10.
C
OMPLETING
SETUP
ON
THE
D
OCU
C
OLOR
40 CP:
1.
With the DocuColor 40 CP connected to the Novell network, restart the
DocuColor 40 CP to perform Setup.
For access to Setup, see page 2-1.
2.
In the Network Setup, choose Port Setup and enable the port you will use for printing
to the DocuColor 40 CP.
This can be Ethernet, Token Ring (if you have installed the Token Ring option), or
both.
3.
Choose Protocol Setup and configure the protocols you will use.
4.
Choose IPX/SPX Setup to select the frame type(s) that will be used between the Net-
Ware server(s) and the DocuColor 40 CP.