xiii
About this manual
•
Color calibration options
Calibration is available both at the server with AutoCal
™
and remotely from a Win-
dows or Mac OS computer with Print Calibrator. AutoCal is a calibration method that
doesn’t require a densitometer. With Print Calibrator, you can customize calibration
targets to suit your printing needs. Server-based calibration (using AutoCal) is covered
in this manual. For information about calibration with a densitometer, see the
Job
Management Guide.
Calibration is available remotely from Windows or Mac OS computers with Print Cal-
ibrator. With DocuColor Print Calibrator, you can customize calibration targets to suit
your printing needs. For information about calibration with a densitometer, see the
User Guide.
•
CMYK simulation options
Users can use CMYK simulation to adjust DocuColor 40 CP color output to DIC,
Euroscale, or SWOP targets. With Print Calibrator, you can create custom simulations
to suit your printing needs. Users can also select a simulation on a job-by-job basis.
For more information on CMYK simulation, see the
Printing Guide
and the
Job Man-
agement Guide.
About this manual
The manual is organized as follows:
• Chapter 1 illustrates the supported network configurations and shows the network
connectors on the DocuColor 40 CP.
• Chapter 2 describes DocuColor 40 CP configuration (Setup) from the Control
Panel, and explains how to set the WebLink destination.
• Chapter 3 describes DocuColor 40 CP configuration (Setup) from WebSetup.
• Chapter 4 provides guidelines for setting up Windows network servers and UNIX
systems for printing to the DocuColor 40 CP.
• Chapter 5 summarizes some administrative features of DocuColor 40 CP software
that are available for IPX/SPX, TCP/IP, and AppleTalk networks, and also offers
some troubleshooting hints.
• Appendix A describes the Token Ring option.
N
OTE
:
Administrator features described in other manuals are summarized on page 5-1.
