4
4-27
Tips for experts—UNIX workstations
T
O
SET
UP
D
OCU
C
OLOR
40 CP
PRINTING
ON
UNIX
SYSTEMS
:
1.
Specify the appropriate settings in DocuColor 40 CP Server Setup.
To access DocuColor 40 CP Setup, see page 2-1.
2.
Specify the appropriate settings in DocuColor 40 CP Network Setup.
Run the setups listed in the table on page 2-11 and enter a valid IP address, subnet
mask and gateway address for the DocuColor 40 CP.
3.
Specify the appropriate settings in DocuColor 40 CP Printer Setup.
T
O
SET
UP
TCP/IP
FOR
COMMUNICATION
WITH
THE
D
OCU
C
OLOR
40 CP:
1.
A superuser (with root login) must add the DocuColor 40 CP to the network’s IP host
table or other system database of network printers.
2.
In the file or utility used by your network, specify the remote printer name, the print
server protocol, the queue, and the spool file for the DocuColor 40 CP name you
assigned.
3.
Make the DocuColor 40 CP available as a printer to other network users.
4.
To verify the TCP/IP connection, ping the IP address or the host name. From any com-
puter on the network, at the command prompt, type:
ping <IP address>
Type the DocuColor 40 CP IP address assigned in DocuColor 40 CP Network Setup.
After the DocuColor 40 CP is set up as a network printer, you can also ping the name
you gave to the DocuColor 40 CP
ping <hostname>
The server should respond with a message such as
<IP address> is alive
Some systems will respond with a continuous display of output from the IP address. To
stop the output, type
Control-C.
You can use the
ping
command at any time.
