2
2-15
Network Setup options
Ignore EOF Character
Yes/No [No]
This option appears only if
Enable Parallel Port
is set to
Yes
. This option specifies that
the DocuColor 40 CP should ignore end-of-file (EOF) messages in a file. This option
must be set to
Yes
to print PostScript files in binary format (not ASCII); under normal
circumstances, it should be set to
No
. When this option is set to
Yes
, the
DocuColor 40 CP uses the parallel port timeout value to determine when the end of
the file has been reached.
When you have configured the port options, choose another port type, or choose Exit
Port Setup and proceed to Protocol Setup.
Protocol Setup options
AppleTalk Zone
List of zones
The DocuColor 40 CP searches the network for AppleTalk zones in your network seg-
ment. Scroll through the list to select the AppleTalk zone in which you want the
DocuColor 40 CP to appear. If your segment has only one zone, the
DocuColor 40 CP is assigned to that zone automatically.
The message “No AppleTalk zone found” may mean your network has no zones, or the
network cable is not connected (see page 4-4). Choose OK.
To configure the DocuColor 40 CP, choose each protocol and enter the settings for
that protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communication
simultaneously.
Network Setup
Protocol Setup
AppleTalk Setup
Enable AppleTalk
Yes/No [Yes]
Select
Yes
if you have an AppleTalk network connected to the DocuColor 40 CP.
This setting enables the DocuColor 40 CP to communicate over AppleTalk net-
works.
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup