2
2-17
Network Setup options
IP Address
[127.0.0.1]
Enter the DocuColor 40 CP IP address for Ethernet. The DocuColor 40 CP is
shipped with the IP address set to the loopback address, which is an internal address
used for network checking. If you plan to print with TCP/IP, you must first assign the
DocuColor 40 CP a unique network IP address. For information about setting up
printing with TCP/IP, see Chapter 4.
Subnet Mask
[255.255.255.0]
This option lets you modify the subnet mask for printing with TCP/IP over Ethernet.
The subnet mask is set to
255.255.255.0
by default. If you set the IP address and you
need to set the subnet mask, enter one of the following values:
•
255.0.0.0
if the IP address starts with a number less than 128
•
255.255.0.0
if the IP address starts with a number from 128 through 191
•
255.255.255.0
if the IP address starts with a number greater than 191
N
OTE
:
Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from those
listed.