2
2-18
Performing Setup from the Control Panel
TCP/IP Setup with Token Ring
Enable TCP/IP for Token Ring, and enter the IP address and subnet mask. Then, if
your TCP/IP network has a gateway, and users outside the gateway plan to print to the
DocuColor 40 CP using TCP/IP, choose Gateway Setup and enter the gateway address
(see page 2-19).
IP Address
[127.0.0.1]
Enter the DocuColor 40 CP IP address for Token Ring. The DocuColor 40 CP is
shipped with the IP address set to the loopback address, which is an internal address
used for network checking. If you plan to print with TCP/IP, you must first assign the
DocuColor 40 CP a unique network IP address. For information about setting up
printing with TCP/IP, see Chapter 4.
Network Setup
Protocol Setup
TCP/IP Setup
Token Ring Setup
Enable TCP/IP for Token Ring
Yes/No [No]
Select
Yes
if you have a TCP/IP network connected to the DocuColor 40 CP over
Token Ring.
If you use Token Ring, enabling TCP/IP for Token Ring is required for enabling the
WebTools.
N
OTE
:
If you are using TCP/IP for printing from Windows NT 4.0 workstations,
enabling TCP/IP here also lets you use the DocuColor utilities from
Windows NT 4.0 workstations using TCP/IP protocols.
