2
2-20
Performing Setup from the Control Panel
IPX/SPX Setup options
To configure the DocuColor 40 CP for IPX/SPX protocols, choose IPX/SPX Setup
from the Protocol Setup menu.
Select Frame Types
Choose Select Frame Types. You must choose at least one frame type to enable
IPX/SPX protocols. The DocuColor 40 CP supports the following frame types for
IPX/SPX:
• for Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP
• for Token Ring—Token Ring and Token Ring SNAP
The frame selection screen allows you to make multiple selections. Depending on
your Port Setup selection, only Ethernet frame types, only Token Ring frame types,
or all frame types are displayed. Press the line selection button beside each frame
type used on your IPX/SPX network. An asterisk (*) appears beside each selected
frame type. (Press the line selection button again to deselect a frame type.) Use the
up and down buttons to scroll to additional frame types. The DocuColor 40 CP
binds to each frame type as you select it.
When you have selected all the frame types used, choose Exit IPX/SPX Setup.
Clear Frame Types
If you selected several frame types by mistake, you can clear them all at once by
choosing Exit IPX/SPX Setup, then choosing IPX/SPX Setup and selecting Clear
Frame Types.
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup
Exit IPX/SPX Setup
Select Frame Types
Clear Frame Types
IPX/SPX Setup
Exit IPX/SPX Setup
Ethernet 802.2 *
Ethernet 802.3
Ethernet II
IPX/SPX Setup
