2
2-39
Color Setup options
Enable Bypass Tray as default
No/Yes [No]
Select
Yes
to specify that jobs should be printed from the bypass tray. Use this option
to enable printing from the bypass tray when tray selection is not otherwise available in
the interface, such as when printing from the command line (lpd or DOS). In general,
select
No
when the interface permits tray selection on a job-by-job basis.
Save Changes
Yes/No [Yes]
Select
Yes
to activate any changes made in PS Setup; select
No
to return to the main
Setup menu without making any changes.
Color Setup options
Color Setup allows you to set the parameters the DocuColor 40 CP uses to control
color output. Most of these parameters can be overridden on a job-by-job basis. See the
Printing Guide and the Color Guide for more information.
T
O
ACCESS
C
OLOR
SETUP
OPTIONS
:
1.
In the main Setup menu, choose Color Setup.
2.
Enter the options appropriate to the printing requirements at the site.
3.
When you have finished, save changes.
In the list of options that follows, default values, where applicable, appear in square
brackets.
RGB Source
EFIRGB/sRGB (PC)/Apple Standard/Off [EFIRGB]
The RGB source is the color space used to control color for conversion from screen to
printed output.
EFIRGB
is based on the reference points used in the creation of the
DocuColor 40 CP software.
sRGB
is based on an average of a large number of PC mon-
itors.
Apple Standard
is the standard reference point for Apple’s ColorSync software.
