2
2-42
Performing Setup from the Control Panel
Auto Clear Job Log Every 55 Jobs
Yes/No [No]
Use this option to specify whether to clear the Job Log after every 55 jobs. If you do
not enable this option, and do not clear the Job Log from the DocuColor 40 CP or
from a remote workstation, the DocuColor 40 CP saves a record of all jobs.
N
OTE
:
In addition to Auto Clearing or manual clearing from a remote workstation, the
Job Log (together with all queued jobs) is also cleared when you choose Clear Server
from the main Setup menu, when system software is reinstalled, or when a new version
of system software is installed on the DocuColor 40 CP.
Job Log Page Size
Tabloid/A3 Letter/A4 [Tabloid/A3]
Select the paper size for printing the Job Log. Regardless of page size, 55 jobs are listed
on a page. The paper size used depends on the
Default Paper Sizes
setting in the Printer
Setup. If the
Default Paper Sizes
setting is
US
, the Job Log is printed on tabloid or letter
size paper, with tabloid the default.
Save Changes
Yes/No [Yes]
Select
Yes
to activate any changes made in Job Log Setup; select
No
to return to the
main Setup menu without making any changes.
Calibration
The Calibration menu lets you calibrate the DocuColor 40 CP from a scanner using
AutoCal™ (automatic calibration). The Calibration menu also lets you remove the
current calibration. When the DocuColor 40 CP is calibrated, a color correction curve
is applied to every color document that is processed for printing.
Densitometer calibration can be performed at a remote workstation using the X-Rite
DTP32 densitometer and Print Calibrator software. Print Calibrator can be used to
load measurements and calibration targets on the DocuColor 40 CP hard disk. These
measurements and targets can be used with both server-based and remote calibration.
For details on calibration, see the Job Management Guide.
