2
2-44
Performing Setup from the Control Panel
At the Tray menu, choose the source of Letter/A4 paper for printing color patch pages,
either a regular paper tray or the Bypass tray (manual feed).
9.
Choose Calibrate, and perform calibration as described below.
For more information, see the Job Management Guide.
10.
When you have finished, save changes.
Calibrate
Calibration options are summarized below. See the Job Management Guide for
calibration procedures and a more detailed explanation of calibration options. You can
print a Configuration page at the server to find out when the DocuColor 40 CP was
last calibrated. The Start page also contains this information. (To print a Configuration
page from a DocuColor 40 CP at Idle status, press the Menu button to display the
Functions screen, scroll down to select Print Pages, and select Configuration.)
N
OTE
:
If any problems arise during calibration, press the Menu button to escape to the
Calibration menu.
Select Target
Copier target [Copier target]
The copier target (the exact name will vary) calibrates the DocuColor 40 CP to its
defined optimums. If any custom calibration targets have been created and loaded on
the DocuColor 40 CP with DocuColor Print Calibrator, they also appear in the list of
targets. A custom calibration target can be selected as the default target. See the Job
Management Guide for more information about custom calibration targets. Using the
copier target is strongly recommended.
Print Measurement Page
Yes/No [Yes]
Choose this option to print a page of known color data for measurement. You are noti-
fied that the copier is printing a measurement page without calibration. The
DocuColor 40 CP prints a page of graduated colors that you will place on the scanner
glass for measurement.
