2
2-45
Administrative functions in the Setup menu
Measure Page
Yes/No [Yes]
Select
Yes
to measure the colors on the measurement page.
You are prompted to position the Kodak Gray Scale strip (included in your
DocuColor 40 CP media pack) and the measurement page on the scanner. If you don’t
use the Kodak Gray Scale strip, the DocuColor 40 CP performs AutoCal 1, measuring
only the color strips. If you do use the Kodak Gray Scale strip, the DocuColor 40 CP
performs AutoCal 2, which measures the gray tones (to correct for possible drift in the
scanner) as well as the color strips. The scanner scans the page and creates an internal
measurements file.
If you select
No
, measurement is skipped and the
Print Comparison Page
option is dis-
played.
Print Comparison Page
Yes/No [Yes]
Specify
Yes
if you want the DocuColor 40 CP to print a page with two versions of a set
of test images, one version using a calibration based on your most recent measurements
and the selected target, and one with no calibration.
Apply/Overwrite Calibration
Yes/No [Yes]
Choose
Yes
if you are satisfied with the calibration shown in the comparison page. The
newest calibration overwrites any previous one.
Choose
No
to return to the main Calibration Setup menu.
This affects all users. Continue?
Yes/No [Yes]
This is a reminder that calibration is a global setting; if you overwrite calibration, every
print job is affected by the new calibration.
If you choose
Yes
, calibration is overwritten and you return to the main Calibration
menu. If you are finished, choose
Exit Calibration
. The DocuColor 40 CP reboots.
If you choose
No
, calibration is not overwritten, and you return to the main Calibra-
tion menu.
