3
3-13
Performing WebSetup
You can modify both NetWare 3.x (Bindery) and NetWare 4.x (NDS) configurations
from WebSetup. Turn on the Enable NDS option if your network uses NetWare 4.x in
native mode. Click Bindery Setup if your network uses NetWare 3.x or uses
NetWare 4.x in bindery emulation mode.
N
OTE
:
If your network uses both NDS and Bindery, set up NDS first. Setting up NDS
after Bindery will overwrite Bindery Setup. If your network uses both NDS and Bind-
ery, including using NetWare 4.x servers in bindery emulation, the DocuColor 40 CP
cannot service NDS and bindery emulation servers on the same NDS tree.
PServer Setup (NetWare Services)
The Enable PServer option must be turned on if you have a Novell server connected.
You can, however, change the PServer polling interval and then modify either Bindery
Setup or NDS Configuration.
PServer Setup (NDS Configuration
)
In initial setup, the DocuColor 40 CP was connected to the network and an NDS
directory tree, with a Printer, a Print Server, and one or more Print Queue objects for
DocuColor 40 CP jobs (see page 4-4), was configured. You can make any changes to
that configuration from WebSetup. To modify NDS Setup you may need permission
to browse the NDS tree. If access to the Print Server is restricted, you’ll need a login
password.
Note that the terms NetWare server, Novell server, and IPX server are in common use
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Enable NDS
NDS has already been enabled. Uncheck this box only to remove NDS support.
Change Trees...
Click to open the Add NDS Tree window.
