USAGE GUIDELINES
12
DocuColor 40 MATERIALS USAGE GUIDE
Steps for Success
1
Run all Heavy Weight Papers from the Paper Tray Bypass.
2
Select Heavy Weight Paper Mode.
3
Load all paper with curl down in the tray.
4
If jams occur, manually curl the lead edge down before loading to
reduce jamming.
5
Pull the Transfer Drawer out carefully to clear any jammed sheet
that may be present.
CAUTION
: The use of paper weights greater than 220 g/m
2
is likely
to result in damage to the copier/printer that will require a service
call. Do not exceed the maximum recommended paper weights.
Hints, Tips and Testing Results
Extensive Xerox testing has shown the following:
When the recommended materials are run as detailed above; with
the correct tray, mode, orientation and curl, feeding performance is
good, but may not equal 24 lb Image Series LX and 90 g/m
2
Colotech performance.
Depending on the specific paper selection, image quality will be
good; however, it may not equal that of 24 lb Image Series LX and
90 g/m
2
Colotech.
The poor formation of many heavy papers increases the likelihood
of image mottle (light patches) with some images. Mottle is more
likely to occur on images with uniform halftone areas. As humidity
increases, mottle usually increases.
12 3. . .
x
x
Summary of Contents for DocuColor 40
Page 57: ......
