USAGE GUIDELINES
DocuColor 40 MATERIALS USAGE GUIDE
17
Hints, Tips and Testing Results
Xerox testing has shown the following:
When copying from a hole-punched original, special actions must be
taken to prevent the holes from printing out as dark spots on the
copy.
Cover the holes on the original by placing a clean white sheet
behind the original before copying, to prevent dark spots.
If you experience jams with hole punched papers, it may be
necessary to change the feeding orientation of the paper. This will
change the placement of the holes and may prevent jams caused by
false jam sensing errors.
CAUTION
: If an image is copied over the area of the holes, toner will
transfer through the holes and onto the Transfer Belt. Toner on the
edges of the holes may be transferred to the fuser resulting in image
quality defects and possible machine damage.
There are a wide variety of hole configurations available. Not all
variations have been tested. Frequent jams are possible with some
hole configurations. Pretesting a small quantity is recommended
before making a large purchase.
Summary of Contents for DocuColor 40
Page 57: ......
