DocuColor 5252 System Administration Guide
2-86
Tools Mode
Output
The Output feature allows you to set the default settings that
display on the Output option on the
Basic Features
screen. You
may select Auto, Face Up, Face Down, Collated, or Uncollated.
Selecting Auto enables the digital press to determine the copy
output based on the scan of the original document. If Auto is
selected, the output from both DADF and the Platen Glass will be
Face Up. If you have a High Capacity Stacker, an Enhanced High
Capacity Stacker or a High Capacity Stacker Stapler connected to
your digital press, you can select which output tray to send your
prints to, and whether or not to separate your printed sets. You
may choose these options independently.
This section provides instructions for using the Output feature
without a finishing device, with a high capacity stacker, with a
enhanced high capacity stacker and with a high capacity stacker
stapler.
Without a Finishing Device
1
Touch the
Output
button on the
Feature Defaults 1
screen. The
Output
screen appears.
2
Touch the
Auto
,
Face Up
, or
Face Down
button.
3
Touch the
Collate
or
Uncollate
button.
4
Touch the
Close
button to return to the
Feature Defaults 1
screen.
