Getting Started Guide
0015647-0001 February 18, 1999
page-25
5. To configure the installable options, scroll down to Installable Options folder and
double click on the icon:
a.
Select the
Xerox 5750/Acolor 620 Support
option from the list. This option
enables/disables
12in x 18in
,
Postcard
, and
Tray 4
support. This option also
disables/enables
Group in Sorter
and
Group in Sorter Reverse
, which are not
supported by the Xerox 5750/Acolor 620 copier.
Xerox 5750/Acolor 620 Support
is
enabled (
Yes
) by default.
If your color server is connected to a Xerox 5750/Acolor 620 copier, use the
default (
Yes
).
If your color server is connected to a Xerox 5790/Acolor 935 or Xerox 5799/Acolor
936 copier, set the
Change Setting
to
No
.
b.
Select the
Optional Sorter
option from the list. This option enables/disables the
Splash M Series sorter features. This option is disabled
(Not Installed
) by default.
If the copier connected to your color server has a sorter attached, set the
Change Setting
to
Installed
.
If the copier does not have a sorter, use the default (
Not Installed
).
c.
Click
OK
.
The installation is now complete and you can start sending print jobs to the color server. The
printer is installed with a set of default options. You can use these defaults, specify new
defaults (which will apply to all your print jobs), or select new options on a job-by-job basis.
For more information, refer to the Splash M Series User’s Manual.
