page-46
0015647-0001 February 18, 1999
Getting Started Guide
4. Do not specify a password in the password field. Click
OK
. You are now in
Administrator mode.
5. Pull down the Administration menu, and select
Configure
, then
Password
, as shown
in Figure 33.
Figure 33: Configure Password
The Change Password dialog box, shown in Figure 34, appears.
Figure 34: Change Password Dialog Box
6. Since the old password is blank, leave this field empty. Enter the new password in the
New Password
field.
7. Re-enter the new password in the
Verify
field and click
OK
.
If the passwords entered in the New Password and Verify fields do not match, the
error message “The new passwords don’t match” appears. You probably made a typing
mistake. Repeat steps 6 and 7.
If the passwords do match, the message “Password accepted” appears.
8. Click
OK
and close the Viewer.