8
Spire CXP8000 Color Server 1.0 Software Installation Guide
3.
When the
PC DOS Start Up
menu appears, the following options are available:
•
Creo Software Complete Overwrite Installation
•
Creo Software Preservation Installation (System Partition Overwrite)
•
Backup Creo System Partition
•
Restore Creo System Partition
•
DOS prompt
4.
Use the keyboard arrows to select
Restore Creo System Partition
.
5.
Press
ENTER
.
The system takes about one minute to respond, and then the following
message appears.
The restore process is irreversible and overwrites all
information on the system partition.
To save job and other resource information use the
Backup_Joblist.bat script.
Continue and restore system partition??
Yes/No
6.
If you press
N
(No), the following message appears.
Please remove the CD-ROM and floppy from the drive and press
CTRL
+
ALT
+
DELETE
to reboot the computer.
a.
Backup the job list database, see
Backing Up the Job List Database
on
page 5.
b.
Return to step 2 and repeat the procedure.
7.
If you press
Y
(Yes), the Norton Ghost window appears, and the files on
partition D are restored to partition C.
8.
When the process is complete, the following message appears.
Please remove the CD-ROM and floppy from the drive and press
CTRL
+
ALT
+
DELETE
to reboot the computer.
9.
Remove the CD from the DVD-ROM drive, and press
CTRL
+
ALT
+
DELETE
to
restart.
You have completed
Restoring the Creo System Partition
.
Note:
Before performing the restore procedure—if the job list database was not
backed up or cannot be restored, you must format the image disks. See
Appendix
A, Formatting the Image Disk
on page 43.