DocuMate 150 Scanner User’s Guide
57
Scanning
Checking the Hardware and Setting the Lamp Power Saving
1.
Right-click on the One Touch icon and choose
Show Hardware
from
the pop-up menu.
2.
The Hardware Properties dialog box opens and shows information
about your Xerox DocuMate 150 scanner.
3.
Click the
Properties
button.
Your scanner has a built-in power saving feature that is set to power
down after 15 minutes of idle time. You can change the time before
the scanner powers down, from 1 minute to a maximum of 4 hours.
4.
Click the arrows for the Lamp time-out setting and choose a time
setting.
To turn the lamp on and off manually without turning off power to the
scanner, click the
Lamp On
or
Lamp Off
buttons.
To return the scanner to its factory settings, click
Reset Device
.
5.
Click
OK
to save the changes and close the dialog box.
Summary of Contents for DocuMate 150
Page 1: ...DocuMate 150 user s guide scanner...
Page 2: ...DocuMate 150 scanner user s guide...
Page 91: ...86 DocuMate 150 Scanner User s Guide...
Page 94: ...05 0747 000...
