Scanning with the TWAIN Interface from PaperPort
92
DocuMate 152 Scanner User’s Guide
Setting Up PaperPort to Work with Your Scanner
When you select a scanning option from the Scanner drop-down
list, either
TWAIN: Xerox DocuMate 152
or
WIA: Xerox
DocuMate 152
(Windows XP and Windows Vista only), the
Scan
button at the bottom of the panel should become active. If it doesn’t
you need to set up PaperPort to work with your scanner.
NOTE:
Setting up PaperPort is a one-time-only process for
each option from the Scanner drop-down list. Therefore, you
may have to set up PaperPort once each for
TWAIN: Xerox
DocuMate 152
and
WIA: Xerox DocuMate 152
. The setup
process, described below, is the same for each option. You will
not have to set up PaperPort again for either option unless you
uninstall the scanner and PaperPort software, then re-install
them.
If this Scan button is not active,
you need to setup your scanner.
