background image

Maintenance

110

DocuMate 272 Scanner User’s Guide

Uninstalling Your Scanner

To uninstall the Xerox DocuMate 272 scanner, remove the scanner 
software, PaperPort, or any other scanning software provided with 
the scanner.

Uninstalling the Scanner and One Touch Software

1. On the Windows taskbar, click 

Start

, point to 

Settings

, then 

click 

Control Panel

.

2.

Windows 2000 and Windows XP:

 Double-click the 

Add/

Remove Programs

 icon.

Windows Vista: 

Double-click the 

Programs and Features

 icon.

3. From the list of programs, select 

One Touch 4.0

.

Click the

 Change/Remove 

button.

4. Click 

Yes

 when asked to confirm that you want to remove these 

software programs.

5. Follow these same steps to select and remove the 

Kofax 

Virtual ReScan 4.10

 and 

OneTouch 4.0 ScanSoft OmniPage 

OCR

 modules from the installed programs list.

6. The One Touch 4.0 software and modules will now be removed 

from your computer.

7.

Unplug the USB cable from the scanner.

8. Close all open windows and restart your computer.

Uninstalling the PaperPort and OmniPage Software

1. On the Windows taskbar, click 

Start

, point to 

Settings

, then 

click 

Control Panel

.

2.

Windows 2000 and XP: 

Double-click the 

Add or Remove 

Programs

 icon.

Windows Vista:

 Double-click the 

Programs and Features

 icon.

3. Select 

PaperPort 

or 

OmniPage 

and click 

Remove

.

4. A message window opens, asking if you are sure you want to 

remove the software from your computer. Click 

Yes

.

5. Close all open windows and restart your computer.

Summary of Contents for DocuMate 272
































































































































Reviews: