Installation
Xerox
®
DocuMate
®
5540
User Guide
13
Connect the USB Cable and Turn on the Power
1.
Remove any tape from the USB cable.
2.
Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
Check your computer’s manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force
the plug into either connection.
3.
Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and
automatically loads the appropriate software to run the scanner.
Summary of Contents for DocuMate 5540
Page 1: ......
Page 34: ...Xerox DocuMate 5540 Loading Documents to Scan 26 User Guide...
Page 55: ......