Pre-Calibration Engine Density Adjustment
Xerox 490/980 Color Continuous Feed Printing System
4-10
Color Management Guide
Note
For the next step, the Queue Name should follow the convention of [
TRC_
] and the number
in inches or millimeters of the paper stock width (i.e., [
TRC_19-5in
], [
TRC_495mm
]).
Decimal points are not allowed in a Queue Name, so substitute in a dash [
-
] if the paper
stock width is not a whole number.
3.
In the Queue Name field, type [
TRC
_
[Paper Stock Width]
].
4.
Under the Data Format drop-down menu, select [
].
5.
In the Delete Job After Printing box, select the [
Manual
] radio button.
6.
For Input Process Mode, select the [
Spool
] and [
Do Not Hold Job
] radio buttons.
7.
For Output Process Mode, select the [
Spool
] and [
Do Not Hold Job
] radio buttons.
8.
For Extended Spool, select the [
Enable
] radio button.
9.
Select the [
Paper Setting
] tab.
10. Ensure that [
SYSTEM_DEFAULT
] is the selected stock set name.
11. In the Paper Identifier drop-down menu, select the imposition file [
Simplex_PreCal_
[Paper
Stock Width]
].
Summary of Contents for Document Centre 480
Page 1: ...Xerox 490 980TM Color Continuous Feed Printing System Color Management Guide 27 October 2008 ...
Page 2: ......
Page 101: ......
