1-46
Getting Started
Setting the System ID (Your Number and Name)
In some countries you are required by law to indicate your fax number on
any fax you send.
The System ID, including your telephone number and
name, will be printed at the top of each page sent from your machine.
The System ID, including your telephone number and name, will be printed
at the top of each page sent from your machine.
1
Press the Menu button, then press the System ID button on the one-
touch keypad. SYSTEM NUMBER appears in the LCD display. A
flashing cursor in the display prompts you to enter the telephone
number.
Note: If there is a number previously registered, it appears in the display.
2
Enter the telephone number (up to 20 digits) to which your machine is
connected.
You can enter a space by pressing the RIGHT button two times.
If an incorrect number is entered, press the Right or Left button to
move the cursor under the incorrect digit, then enter the correct number
or press the Delete button to delete the number.
3
Press Enter when the correct number is displayed. The display prompts
you to enter your ID name.
Print the 480cx User Guide
Summary of Contents for Document WorkCentre 480cx
