SETTING THE SYSTEM CONFIGURATION
4-48
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Correcting a feeder tray mismatch error
When a feeder tray is adjusted for a certain size paper, the system
senses that adjustment. (Other stock attributes, such as weight,
color, and form type, are not sensed.) The IPS also reads the input
configuration, which informs it of what size paper
should
be loaded in
any particular tray.
A feeder tray mismatch error is signaled when the IPS detects that
the paper being specified in the current input configuration for a
particular printer tray is not the same size as the paper actually
loaded in that physical tray.
When you click Apply & Save to implement the configuration, an error
message window displays, giving the number of the printer tray, the
media size that is loaded in it, and the size paper that was specified
for it in its corresponding tray cell. The Input Configuration window
remains open and the configuration you are working on is not
updated.
Figure 4-36.
Feeder tray mismatch error message
If a tray mismatch error occurs, follow these steps:
1. Click OK to close the message window and unlock the screen.
2. On the Input Configuration window, do one of the following:
•
In the mismatched printer tray cell, place a media icon that
matches the paper already loaded in the printer.
•
Replace the paper in the physical tray with stock of the size
specified in your input configuration.
3. Click Apply & Save. If there are no more mismatches, the Input
Configuration window closes and your configuration is updated
and applied.
4. If there are additional mismatches, or the first one still has not
been fixed, the Mismatch error message window redisplays and
the Input Configuration window remains open. Repeat steps 1
through 3 until all mismatches are corrected and the Input
Configuration window remains closed.
