C o n f i g u r i n g N e t W a r e 2 . 1 5 a n d 3 . 1 x
C h a p t e r 3 : N e t W a r e C o n f i g u r a t i o n
❖
3-7
Configure the
Print Server
Use the following procedures to configure the Print Servers
function:
1. Choose the print server name from the
Print Servers
list
and press
.
The
Print Server
Information menu appears.
2. Choose
Print Server Configuration
from the menu and
press .
3. Choose
Printer Configuration
from the menu and press
. The
Configured Printers
menu appears. Since this
is a new Print Server entry, all printers are labeled Not
Installed.
4. Choose the printer and press
. The
Printer 0
Configuration
screen appears with a title of Printer 0, as
shown in the following example.
5. If you choose to, change default in the Name field on this
form to something that helps you identify the printer, for
example, LASER_PRINTER. The print server uses this
name in its message back to the users on the Notify list.
Select
Name
, enter a name, and then press
.
6. Select
Type
and press
. A list of printer types is
displayed. Choose
Remote Other/Unknown
and press
. This creates default entries in the other fields.
These defaults are usually optimal, so do not change
them without specific knowledge of the effects.
Book.frm : Chap3.frm Page 7 Saturday, October 12, 1996 7:43 AM
