N e t W a r e C o n f i g u r a t i o n
C h a p t e r 3 : N e t W a r e C o n f i g u r a t i o n
❖
3-33
Using the
Novell
PCONSOLE
Utility
This section explains how to use the PCONSOLE utility to
perform the following tasks:
Attach and select a file server
Select or delete queues for the print server
Set-up the Notify function
See the
NetWare Print Server Manual
for detailed
information on this utility.
Changing the File
Server
You can specify a file server as the current one. To change the
file server, use the following procedures:
1. Log into the current file server and start the PCONSOLE
utility.
2. Select
Change Current File Server
from the Available
Options menu.
3. Press the
Insert
key to display the available file servers.
4. Select the file server you want as the current one and
press .
5. Enter your username and press
. If the username
requires a password, the
Password
screen is displayed.
Enter the password and press
.
6. Select
Change Current File Server
from the
Available
Options
menu. A list of the attached file servers is
displayed.
7. Select the current file server from the
File Server/
Username
screen.
Note
You must have Supervisor privileges to perform many
PCONSOLE operations.
Book.frm : Chap3.frm Page 33 Saturday, October 12, 1996 7:43 AM
