U N I X P r i n t i n g
5-28
❖
D o c u P r i n t 4 5 1 2 / 4 5 1 2 N N e t w o r k I n t e r f a c e C a r d U s e r G u i d e
Setting Up an AS/400 Systems to Use lpd
When working with the output queue description
(WORKOUTQD), there are several fields that must be defined
for the NIC to function properly as a remote printer device.
Use the following procedures to do this:
1. When prompted for the remote system, type
INTNETADR
so the AS/400 recognizes the device as an IP device.
2. Type
PORT1
for parallel port 1. Type
PORT2
for parallel
port 2, etc.
3. Connection type
must
be
IP
.
4. Internet address
must
be the IP address of the NIC
device.
5. Destination type
must
be
OTHER
.
6. When prompted for transforming SCS to ASCII, type
YES
to allow the AS/400 do the character translation.
7. Manufacturer type and model
must
be the print driver
that goes with your printer. For example, OKI320IBM.
Setting Up a DEC ULTRIX 4.3 RISC or OSF1/ALPHA
Remote Printer
Set up a remote printer on the host that sends jobs to a NIC.
1. At the prompt, type:
lprsetup
2. Select
add
.
3. Enter a name for your printer and press
.
4. "Do you want more information on specific printer types?
" Press
e
.
5. A list of ULTRIX-supported printers is listed. Type
remote
and press
.
6. Enter a printer synonym (alias) and press
.
Book.frm : CHAP5.FRM Page 28 Saturday, October 12, 1996 7:43 AM
