JOB CONTROL TASKS
Job control tasks
The following sections contain instructions for performing
specific job control tasks.
Abort
Use this task to do one of the following:
•
Remove a specific print job from the system
•
Remove the print job currently being processed
•
Cause the current print job to stop printing (printing
continues with the next report)
•
Cause the currently active nonprint task (such as FDL or PDL)
to abort (there must be no active print jobs when this
command is entered).
Abort task through windows
Select “Abort” from the Job Control menu to open the Abort
window.
Figure 5-2.
Abort window
2. Select one of the following options:
•
To cause the current job to stop printing, select the
Output button.
•
To remove the print job currently being input into the
system, select the Input button.
•
To remove a specific print job from the system, enter the
job number in the Job Number field.
•
To abort a non print task (such as FDL or PDL), select the
Non-Print Task button.
Note: You will only see this option if the system is idle.
3. Select the appropriate header button:
•
Apply/Close. Apply your selection and close the window.
•
Apply. Apply your selection.
•
Close. Close the window.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
5-3
