HIP PRINTING TASKS
Select a communication mode
Use this task to select the HIP communication mode to use.
Note: This task is not necessary if your LPS has only one host.
Select a Communication Mode task
through windows
From the HIP window, select the mode you want from the Host
field's auxiliary menu.
Select a Communication Mode task
through command line
Enter the following command:
HIP HOST {XNS|XPF}
HIP must be offline to change from one host to another. If the
system is not offline or is not idle, the command is rejected and
one or more of the following messages appears:
HP2020 SELECTED HOST NOT PRESENT ON SYSTEM
HP2400 HIP INTERFACE MUST BE OFFLINE. ENTER 'HIP OFFLINE'.
HP7100 CANNOT CHANGE HOSTS WHILE JOBS ARE PENDING OR ACTIVE.
Place HIP online
Use this task to place the LPS online to the host.
Place HIP Online task
through windows
Select the Online header button from the HIP window.
Place HIP Online task
through command line
Enter the following command:
HIP ONLINE [ALL]
The ALL parameter specifies that both print and nonprint files are
accepted. The default is that only print files are accepted. As
print jobs are received, they are entered into HIP's internal job
queue and become eligible for submission to Operator
Communications Subsystem (OCS) for printing. One of the
following messages appears:
HP1210 HOST ONLINE. ACCEPTING ALL JOBS
HP1220 HOST ONLINE. ACCEPTING PRINT JOBS ONLY
HP2010 NO HOST SELECTED
HP2030 ALL NOT ALLOWED AT CURRENT LOGON LEVEL
HP0200 FAILED TO GO ONLINE
Note: ONLINE ALL is accepted in logon level class 2 and above
for all hosts except for XNS hosts. HIP is always in ONLINE ALL
mode for the XNS hosts.
If the selected host is not online and responding, the following
message appears every 30 seconds until the host comes online
or the online request is terminated by the HIP OFFLINE
command:
HP1240 HOST NOT RESPONDING
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
8-5
