STATUS AND PRINT TASKS
Tray Loading task through
system controller
terminal
(non-U.S. markets only)
1. When a print job calls for a stock change, the existing
clusters appear on the system controller display. The current
trays field is blank for undefined clusters.
Refer to the following example.
BLUE ASIZ ----PREFER--- ----CURRENT--- ---STATUS---
1 3 1 3 HAS TRAYS
GREEN ASIZ ---PREFER--- ---CURRENT--- ---STATUS---
2 IS DEFINED
2. Load the correct stock in the correct trays.
3. To define the current trays for the undefined cluster, enter
the following command:
CLUSTER cl-name tray number
cl-name
The name of the cluster you are defining.
tray number
The tray(s) in which stock for the cluster is
currently loaded.
Clusters
Use the Clusters task to:
•
Display all the clusters in the system with their preferred and
current trays
•
Define new clusters
•
Edit preferred or current trays for existing clusters.
Note: You must define tray contents to the LPS when you
change the stock in a tray being used by the current stockset
without being prompted by the system to change the stock
in that tray.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
9-13
