FILE CONTROL TASKS
File control tasks through windows of PC UI
To select file control tasks using the windows of the PC UI:
1. Open the Files menu icon.
The Files menu window appears, listing the available options.
Figure 10-1.
Files menu window
2. Turn to the section of this chapter which explains the task in
which you are interested.
File control tasks through command line
You can perform file control tasks by entering commands either:
•
Through the Messages window of the PC UI
•
Through the system controller terminal (non-U.S. markets).
To enter commands through the Messages window of the PC UI:
1. Place the cursor in the window.
2. Click once with the left mouse button.
3. Enter the command.
If you are using the system controller terminal, just use the
keyboard to enter the command.
File control tasks
The following sections contain instructions for performing
specific file control tasks. For additional information about each
task, refer to the Xerox 4635 Laser Printing System PC User
Interface Reference.
10-2
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
