PAPER FACTS
Table 3-6.
Stacker bin performance guide
Paper
Superior performance
Good performance
Performance limits and
suggested alternatives
Size range*
8 by 10 to 11.69 by 17
inches/203 by 254 to 297 by
432 mm.
Smaller or larger sizes
cannot be used.
Weight range
20 to 110 pounds/75 to 200
gsm
Lighter than 20 pounds/75
gsm and no lighter than 16
pounds/60 gsm
Weights outside the limits
shown here are not
recommended.
Capacity
•
Capacity automatically
limited so stack weight
will not exceed 30
lbs/13.g kg
•
Selectable with bin
capacity programming
(Refer to the “Bin full
criteria and setting bin
limits” section of chapter
9, “Status and print
tasks,” for instructions.
Stack quality
•
Xerographic paper in
good condition
•
20 pound/75 gsm and
heavier stock
•
Very low to no output
curl
•
Lighter weight stocks
with low output curl
•
Intermixed stocks
•
Adjust process decurler
•
Flip paper in paper
feeders
•
Limit stack capacity to
acceptable limits.
Type or
condition
•
Xerographic paper in
good condition
•
Predrilled stock
•
No cut-outs, perforated
or intermixed weights
•
Labels, preprinted forms,
perforated stocks
•
Intermixed weights
•
High output curl stocks
can cause severe stack
quality problems
•
Tab stock intermixed
with smaller stocks
results in degraded stack
quality
•
Reinforced mylar should
be limited to small stacks
of 200 sheets or less or
sent to the sample tray.
*
Optional 7 X 10 enablement kit allows 7 by 10 inches/178 by
254 mm paper size.
3-16
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
