Adjusting Copying Options
6-105
Specifying 2-Sided Copies
2-sided copies can be created when copying originals. Your printer must be configured with a duplex unit
to create 2-sided copies.
To make a 2-sided copy:
1.
On the control panel, press the
Copy
button.
2.
Select
2-Sided
, and then press the
OK
button.
3.
Select either
Flip on Long Edge
or
Flip on Short Edge
, and then press the
OK
button.
The actual outcome depends on the orientation (portrait or landscape) of images on the page, as displayed
in the following illustrations.
Note:
The factory default is 1 -> 1 Sided.
Copies do not begin printing until the printer has scanned all the originals for the first page. When making
two-sided copies, printing does not begin until enough pages have been scanned for two sides.
Selecting the Default Copy Settings
To set the default copy settings:
1.
On the control panel, press the
System
button.
2.
Select
Default Settings
, and then press the
OK
button.
3.
Select
Copy Defaults
, and then press the
OK
button.
4.
Press the
Down Arrow
button until the desired option appears, and then press the
OK
button.
5.
Select the desired setting, and then press the
OK
button.
6.
Repeat steps 4 and 5 as needed.
7.
Press the
Exit
button.
Portrait
Landscape
Flip on Long Edge
Flip on Short Edge
Flip on Short Edge
Flip on Long Edge
