Adjusting Copying Options
6-112
Output Adjustments
You can change the following output adjustment settings:
■
Collating Copies
on page 6-112
■
Output Quality
on page 6-112
Collating Copies
When you make several copies of a multi-page document, you can collate the output. For example, if you
are making three single-sided copies of a six-page document, the copies are printed in this order when you
select collated:
1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6
If you select uncollated, the copies are printed in this order:
1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6
To select a collating option:
1.
On the control panel, press the
Copy
button.
2.
Select
Collated
, and then press the
OK
button.
3.
Select
Uncollated
or
Collated
, and then press the
OK
button.
Note:
The factory default is Uncollated.
Output Quality
The following table describes the two output-quality modes:
To change the output-quality mode:
1.
On the control panel, press the
Copy
button.
2.
Select
Output Quality
, and then press the
OK
button.
3.
Select either
Standard
or
Enhanced
, and then press the
OK
button.
Note:
The factory default is Standard.
Output-Quality Mode
Type of Copy Job
Standard
General-purpose mode for copies. Produces crisp, bright copies at
high speed.
Enhanced
Best mode for high quality copies. Produces very smooth accurate
colors. This mode takes longer to process and print than Standard
mode.
